Bill of Quantity in Civil Engineering

Bill of Quantity in Civil Engineering INTRODUCTION As stated in the assignment brief, the objective of this assignment is to appreciate and disseminate the knowledge, techniques and skills of measurement into actual practice and to expose the students with the production of Bills of Quantity referring to the measurement work done as part of tender documentation requirements. Based on CESMM, measurements can be classified as coordination and planning of quantities and also to list the details of the work to ensure it is running with a consistent, systematic and new construction techniques were explained well. Bill of Quantities is prepared by Quantity Surveyor based on measurement from the construction drawings / building plans. This document has been used in the construction of buildings which has been detailed in the context of the quantity of each category of work performed. For an example, building works, mechanical, electrical works, civil, structural works and infrastructure works. The contractor will priced or estimate all the works associated in completing the buildings during pre-construction stage. The civil works measurement referred to a document called Civil Engineering Standard Method of Measurement (CESMM). Before this document is produced, the party who responsible for the working measurement refers to the method adopted in the United Kingdom named ‘CESMM 2nd Edition or 3rd Edition’. There are most of the benchmark method used in building works, they use their own measurement system. This leads to inconsistencies in the measurement procedure. As a result, contractors are having difficulty to appreciate the tender. Work on the actual measurement must take into account the complexity of the work undertaken. Work measurement for any item of work is also closely associated with the activities and construction methodology. TASK 1 Discuss the importance of Civil Engineering Standard Method of Measurement (CESMM) in the civil engineering works / projects taking-off. Civil Engineering Standard Method of Measurement (CESMM) is to be used in conjunction with the Conditions of Contract for Civil Engineering Works. CESMM does not deal with the preparation of Bills of Quantity for mechanical electrical engineering work, building work or work which is seldom encountered in civil engineering contracts. If any such work to be included in the contract, such work shall be measured in accordance with their respective Standard Method of Measurement and shall be stated in the Preambles to the Bills of Quantity. CESMM provides a standard format, either in the form of items components and how they should be measured. A multi-level classification introduced in CESMM or space for a description of the work that can be developed. In the other hand, CESMM is to understand the purpose of using a standardised method of measurement. CESMM measurement method using the concept of method-related charges to present the cost of construction at the site in more obvious, such as covering the cost of site preparation and building machinery operating costs, and labor force. The importance of CESMM are be able to prepare bill items and re-measure completed work in accordance in civil engineering works. Be aware of the structure and application of Method Related Charges, unique to CESMM and the benefits arising from this facility. Be aware and appreciate the relationship of the Method of Measurement and the Conditions of Contract in the civil engineering works. TASK 2 Identify and discuss the contents of the tender document to be prepared for the tendering stage. The tendering stage is the process of selecting and appointing the contractor for the main construction contract. The contents of the tender document to be prepared for the tendering stage are: Letter of Invitation to tender– The bidder produce a formal letter to the tenderer, stated the tender closing date and time. Introduction-The tenderer invites bidder to submit a detailed proposal on the provision of equipment/system/software/services/works are detailed in the Tender Document. Conditions of contract – A written agreement is intended to bind the contractor appointed by the employer based on the laws and conditions imposed and agreed. Contract Drawings – technical / detailed construction drawings for measurement / costing by Quantity Surveyor / engineers – prepared by architect / engineers. Specification / Preambles A brief description of the materials and workmanship, the standard or quality of workmanship .It must convey the architect and engineer’s requirements. Bill of Quantities – Prepared by the Quantity Surveyor/stint on the size of the construction drawing plan / building. This document has detailed all the quantities for each category of work used in the construction of buildings. For example, building works, mechanical, electrical, civil, structural works, infrastructure works and other contractors would cost / budget all work related to the completion of pre-construction building. Investigate the Tenderer Financial standing – Look back into the audited accounts for past three years whether they have stable financial background. Get confidential report from firm’s bank. Instructions to Bidder – Purpose of Instructions. Tender Acknowledgement. Tender Document Preparation of Proposals. Submission of Proposals – (technical unpriced commercial proposals, priced commercial proposals, softcopy format) Acceptance of Bidder’s Proposal. Validity of Bidder’s Proposals. Queries Confidentially of Tender Document. Audit of Bidder’s Facilities. .Pre-award Meetings. Bidder Questionnaires Forms. Suspension and cancellation Award of Contract. Proposal Submission Guidelines. Scope of Works, Technical Specifications Requirements. Bill of Quantity (BQ) and Price Schedules. Bidder’s Compliances to Tenderer General’s Terms and Conditions. Tender Acknowledgement Form. One of the contents in the tender document is conditions of contract. What are the available conditions of contract, which are commonly used in the construction project? Contract Agreement. Letter of Acceptance. Tender and Appendix to Tender (as submitted by the Contractor in the Tender) Particular Conditions of Contract, Conditions Part 11(Part of Tender Document) General Conditions of Contract, Conditions Part 1(Example, as published by DM) Specifications(parts of Tender Documents) Drawings. Priced Bill of Quantities. What are the functions of the conditions of contract? The functions of Contract Conditions is to set out the principal legal relationship between the parties to a construction project, determining the allocation of risk and consequently, price. Conditions of contract must be read in conjunction with specification documents, drawings bills of quantities, activity schedules and special conditions. Standard form contracts often comprise suites of contracts with ‘back to back’ subcontracts, consultant appointments and collateral warranties. The formal conditions of contract in a tendering process is: Certification of free competition For the purpose of restricting competition to the price in the tender shall not be taken in consultation discretion. Restriction of publicity action Tenderers are not authorised to mention in their publicity that they have been invited to tender, are tendering or have tendered. Validity period of tender The tender shall specifically state a period of validity of 4 months from the closing date for the receipt of tenders, or such other period as may be provided for in the Special Conditions of Tender. Period for tender preparation The closing date for submission of tenders is stated in the cover letter. Extensions of this period, requested in writing, will only be considered by the Agency if operational requirements so permit, and if, in the case of competitive tendering, fair competition is not thereby impaired. Requests for extensions received less than two weeks before the closing date will,not be considered. Right to audit During its validity period, to request the tenderer to provide evidence of any element of his quotation and may call for additional detailed information irrespective of the type of price proposed. The Agency reserves the right to audit the quoted prices. Negotiation prior to contract award The Agency reserves the right to negotiate with one or more tenderers before taking a decision on the placing of a contract. The offer shall remain valid until changes are agreed in writing. The original offer, as modified shall constitute a binding revised offer. CONCLUSION Civil Engineering is a broad field containing many engineering sub-fields, such as transportation engineering, environmental engineering, geotechnical engineering and construction engineering. I understand the knowledge, techniques and skills of measurement with the production of Bills of Quantity referring to the measurement work according to the requirements of Tender Documents. In addition, I must also thanked to my group members and also my lecturer, Mr. Kumarason, as they helped me a lot in the measurement part in Task 2. It helps to create clear open channels of measurements and the procedures in tendering documents, improved my productivity in measurements skills and help keep morale high. In short, this assignments helps me to accept the idea of working in a construction site in future, following the rules and achieving correct Tendering Document. Therefore, this assignments helped me share ideas which ultimately lead me to innovation and better opportunity in my future under takings. REFERENCES Traditional Contract tender.info.[online] Available at : http://www.designingbuildings.co.uk/wiki/Traditional_contract:_tender  [Accessed on 8th July 2014] Construction Contract Conditions.info.[online] Available at : http://www.designingbuildings.co.uk/wiki/Construction_contract_conditions [Accessed on 8th July 2014] Bill of Quantity.info.[online] Available at: http://www.designingbuildings.co.uk/wiki/Bill_of_quantities [Accessed on 9th July 2014] Seeley I.H., Winfield R. – Building Quantities Explained, Fifth Edition, Macmillan (1999) Willis A.J., Willis C.J. – Elements of Quantity Surveying, Seventh Edition, Granada (1978)

Privatization in India Essay

Ram Mohan Visiting Faculty, Finance and Accounting Area Indian Institute of Management Ahmedabad, India Abstract The proposed research is intended to survey the process of privatization in India and assess its impact on the Indian economy. The central issue we will address is the impact of privatization that has taken place so far on profitability and performance of PSUs. Going beyond this, we will attempt to understand what explains the impact of privatization on performance. Is it the use of market power by oligopolistic firms whose pricing power had been constrained under government ownership ? Is performance bought at the expense of labour through extensive layoffs so that what we see is essentially a transfer from workers to shareholders ? Or are we confusing the impact of privatization with the more generalised impact of deregulation in the economy, which in itself could spur efficiency ? The research output will comprise the following: 1. A survey of the literature on privatization, particularly with respect to less developed countries. 2. A review of the role of the public sector in the Indian economy, and the process of economic liberalization and privatization in India upto this point. 3. Impact of privatization on firm performance. 4. Explanation for the impact of privatization 5. Assessment of mechanisms of corporate governance in India. -2- I. Background: privatization in theory and practice A great wave of privatization has swept the world in the past two decades, embracing the industrial economies, the transition economies of East Europe and large parts of the less developed world, and it continues to roll on. It is interesting, however, that its basis in theory was somewhat shaky to start with. Moreover, a sizable enough body of empirical evidence, on which hypotheses about its impact could be tested, became available only several years down the road. So much of the initial impetus to privatization entailed a leap in faith, and, as happens all too often in the development of knowledge, attempts to explain its impact have followed on the heels of widespread existing practice.

Ap Chemistry †Gravimetric Lab Essay

By filtering and weighing the carbonate after it has precipitated, the mass and moles of CaCO3 could then be found; with these values, a molar mass of M2CO3 can be found. Using gravimetric analysis, it has been determined that the unknown Group 1 metal carbonate compound is K2CO3 (potassium carbonate). Experimental Sources of Error: A) The first source of error had to do with the precipitation section of the lab. Not only is possible, but it is almost guaranteed that the CaCO3 did not precipitate to its fullest extent. Attaining a precipitate that is 100% pure and is exactly of the composition represented by its chemical formula would be extremely difficult. A second source of error was in the filter paper. No filter paper can be perfect, and it is very likely that it did not filter all of the precipitate, which would then decrease not only the mass of CaCO3, but also the molar mass because only the majority of the correct mass of the precipitate was found; by lowering the mass of a compound, its molar mass will also fall. B) After the precipitate had been filtered and dried, the filer paper that contained the precipitate was mishandled and its contents was scattered all over our lab bench. The dried precipitate had to be then gathered and then put back onto the filter paper; this contributed a large portion of human error to this lab. Spilling the dried precipitate is a source of human because it is almost guaranteed that not all of the precipitate was collected that had been spilled. This would have then lowered the mass of all of the following data, and wholly, our end result (i.e. molar mass). C) Percent error = your result-accepted valueaccepted value x 100 Percent error = 128.79-138.21138.21 x 100 = 6.8157% Considering that any percent error that is under 5% is often times considered accurate, a percent error of 6.8% can be viewed as fairly accurate. It is not too far off to completely disregard, but it is also not close enough to use as fact.

Bachelor Business Management Degree Use a Degree from Kaplan University to Boost a Small Business Start-Up 2019

New businesses have about a 50/50 chance of surviving over the course of 5 years, says Brian Head, economist with the Small Business Administration Office of Advocacy. According to BusinessKnow-How.com, poor management ranks second on a list of top 7 reasons why new businesses fail. Professionals who are serious about increasing their chances of success in the business world are building their management skills through the bachelor business management degree. Students Develop Business Skills for Success with a Bachelor Business Management Degree Proper management skills are essential to surviving the most vulnerable times of a new businesss evolution. Bachelor business management degree students learn tools such as: Critical thinking skills from bachelor business management degree professionals. Communications techniques from experienced bachelor business management degree workers. Technical competencies from bachelor business management degree professors. Efficient management practices from bachelor business management degree case studies. Bachelor Business Management Degree Specialties Allow Students to Personalize Their Educations The U.S. Census Bureau reports that over 17. million U.S. small businesses were in operation in 2017. No one bachelor business management degree curriculum could possibly cover the needs of such a large population. Consequently, some Universities offer 4 unique programs, including: Bachelor Business Management Degree with an E-Business Emphasis. Bachelor Business Management Degree with a Health Care Management Emphasis. Bachelor Business Management Degree with a Human Resource Management Emphasis. Bachelor Business Management Degree with a Sales and Marketing Emphasis. .u7073bcbd3b4d961bcf6392b788bd9164 { padding:0px; margin: 0; padding-top:1em!important; padding-bottom:1em!important; width:100%; display: block; font-weight:bold; background-color:#eaeaea; border:0!important; border-left:4px solid #34495E!important; box-shadow: 0 1px 2px rgba(0, 0, 0, 0.17); -moz-box-shadow: 0 1px 2px rgba(0, 0, 0, 0.17); -o-box-shadow: 0 1px 2px rgba(0, 0, 0, 0.17); -webkit-box-shadow: 0 1px 2px rgba(0, 0, 0, 0.17); text-decoration:none; } .u7073bcbd3b4d961bcf6392b788bd9164:active, .u7073bcbd3b4d961bcf6392b788bd9164:hover { opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; text-decoration:none; } .u7073bcbd3b4d961bcf6392b788bd9164 { transition: background-color 250ms; webkit-transition: background-color 250ms; opacity: 1; transition: opacity 250ms; webkit-transition: opacity 250ms; } .u7073bcbd3b4d961bcf6392b788bd9164 .ctaText { font-weight:bold; color:inherit; text-decoration:none; font-size: 16px; } .u7073bcbd3b4d961bcf6392b788bd9164 .post Title { color:#000000; text-decoration: underline!important; font-size: 16px; } .u7073bcbd3b4d961bcf6392b788bd9164:hover .postTitle { text-decoration: underline!important; } READ Opening Doors to a Health Care Financial Management CareerStarting a small business often involves taking risks associated with personal money, security, and ideas. With a bachelor business management degree, entrepreneurs build a strong foundation that encourages business success. Related ArticlesBachelor Business Degree in Management of Information Systems Enter an IT Career in the Business EnvironmentAccredited Bachelor Degree Business Online Acquire Skills Necessary for Success as an EntrepreneurAssociate Degree Business Administration Salary Does an AA in Business PayBachelor Criminal Justice Degree Benefits and Rewards of a Crime Scene Investigation EmphasisBachelor of Science in Business Administration Learn What it Takes to Be a Chief Financial Officer (CFO)Fashion Design and Fashion Merchandising Two Potential Tracks for the Fashion-Minded Student

The Doctrine of Double Effect - 2090 Words

There are times when doing the right thing can lead to bad consequences. For example, if your family is about to be killed by a criminal and the only thing you can do to protect your family from being murdered is to kill the person who is threatening them, you would feel it necessary to commit an evil in order to prevent a greater misfortune. On the other hand, the actor in cases such as this faces a moral dilemma of having to kill someone. This is where the Doctrine of Double Effect comes into play. The Doctrine of Double Effect (DDE) is a principal which aims to provide specific guidelines for determining when it is morally permissible to perform an action in the pursuit of a positive outcome with the full knowledge that the action will also bring about an evil consequence. (Solomon, 2014). Although the Doctrine of Double Effect is viewed as a positive theory by man, it is unjust in that it gives people a justification to commit heinous acts if they merely claim that they intended some sort of good outcome to result from their actions. The Doctrine of Double Effect was first created by Thomas Aquinas. Aquinas believed that if you killed someone who was attacking you, you were justified in this action because the individual who was being attacked didn’t have an intent to kill the attacker from the beginning. Aquinas observes that â€Å"nothing hinders one act from having two effects, only one of which is intended, while the other is beside the intention. †¦ Accordingly, the actShow MoreRelatedThe Doctrine Of Double Effect1163 Words   |  5 PagesIntroduction to Ethics in the Healthcare Setting Doctrine of Double Effect The Doctrine of Double Effect (DDE) is utilized in the explanation of the permissibility of dealings and actions that result in impairment for example, death of a person, as a result of achieving some good at the end. This explains that it is sometimes acceptable to harm someone if the action will evoke some good at the end (Mclntyre 42). This reasoning was introduced by Thomas Aquinas but has developed and many versions ofRead MoreThe Doctrine Of Double Effect877 Words   |  4 Pagessuppression of respirations. However, the Doctrine of Double Effect helps to determine if the act is permissible. With this particular case, Nicolas is faced with the situation of either facing unbearable pain or taking morphine to ease the pain in his last months of life. Before this case can be analyzed according to the Doctrine of Double Effect, one must first consider the act, good effect, and bad effect. In this case, the act is the use of morphine. The good effect that comes from the act is the reliefRead MoreThe Doctrine Of Double Effect2007 Words   |  9 PagesThe doctrine (or principle) of double effect is often invoked to explain the permissibility of an action that causes a serious harm, such as the death of a human being, as a side effect of promoting some good end (McIntyre, 2004) . According to the principle of double effect (DDE), there are times where it is permissible to cause harm – as a side effect of bringing about a good result, even though it would not be acceptable to cause such harm as a means to providing the same good end. I will nowRead MoreEssay on The Doc trine of Double Effect1307 Words   |  6 PagesCase Assignment: The doctrine of double effect says that the pursuit of good is not as acceptable if the harm that results is intended rather than merely foreseen (Lippert-Rasmussen, 2010). To some it is a nonabsolutist moral principle in which as long as significant good resulted from the action, it is allowable (Lippert-Ramussen, 2010). Scanlon believed that an act that leads to the death of an innocent person can never be justified by the good that results (Lippert-Ramussen, 2010). ScanlonsRead MoreProblems With The Doctrine Of Double Effect1904 Words   |  8 PagesJessie Buckler Term Paper Philosophy 3300 April 25, 2016 PROBLEMS WITH THE DOCTRINE OF DOUBLE EFFECT Defenders of the Doctrine of Double Effect argue that there is a morally significant distinction, which bears on the rightness of actions, between those consequences of our actions that are intended and those that are foreseen. Utilitarians often use this doctrine to describe their stance on the topic of harming others. This paper will look at three situations that are commonly used to defendRead MoreDoctrine of Double Effect Essay1464 Words   |  6 PagesAlecia Rhines Doctrine of Double Effect Trident University What is the Doctrine of Double Effect? The doctrine of double effect if often invoked to explain the permissibility of an action that causes a serious harm, such as the death of a human being, as a side effect of promoting good ends. It is claimed that sometimes it is permissible to cause such harm as a side effect of bringing about a good result even though it would not be permissible to cause such harm as a means to bringing aboutRead MoreThe Doctrine Of Double Effect : Writing Assignment1176 Words   |  5 PagesEvan Bakker Professor Cole Honors Ethics 6 February 2015 The Doctrine of Double Effect: Writing Assignment 1 The method of reflective equilibrium is a method that is a state in which our moral principles are in accord with our intuitive moral judgements. There are two different kinds of reflective equilibrium: narrow reflective equilibrium, which is when one’s intuitive judgements concerning a rather restricted set of cases is rendered consistent with a set of general moral principles, where asRead MoreThe Problem Of Abortion And The Doctrine Of Double Effect1775 Words   |  8 PagesIn The Problem of Abortion and the Doctrine of Double Effect , Phillipa Foot takes into account what is called the Doctrine of Double Effect (henceforth DDE), which appeals to two effects that an action causes - one intended at and desired, the other foreseen as a consequence of the action but undesired. She uses this doctrine to critically examine its application and thereby assert that My conclusion is that the distinction between direct and oblique intention (the DDE) plays only a quiteRead MoreT he Doctrine Of The Separate Legal Entity1386 Words   |  6 Pagesact is the doctrine of the separate legal entity. Section 1.5.1 of the act outlines the separate legal entity theory, legislated as a company being distinct from its owners, managers, operators, employees and agents. Though, the doctrine of separate legal entity has been argued as a double edged sword. A ‘double edged sword’ is defined by Oxford as ‘a situation or course of action having both positive and negative effects.’ The separate legal entity doctrine is evident of being a ‘double edged sword’Read MoreThe Debate Over Physician Assisted Suicide951 Words   |  4 Pagesdetermined by the doctrine of double effect. The doctrine of double effect states that an action is morally permissible if the bad effect is not intended but may be foreseen; if the act is not intrinsically wrong; and if good effect is the result of the action, not the bad effect. This doctrine can be used to determine whether or not providing the diamorphine is morally permissible. With the doctor committing to giving the diamorphine, he is satisfying all the requirements for the double effect. The intent

Expansion and Diversification Within a Business - 1991 Words

Opportunities for expansion and diversification Diversification is a form of corporate strategy for a company. It seeks to increase profitability through greater sales volume obtained from new products and new markets. A business strategy in which expansion is obtained by increasing the number of products in which customers can purchase from a company s store/under the company’s name. Fred Greer was able to mention how the Wrightbus Company expand within the bus manufacturing sector, this is carried out as employees continue to carry out production of the highest standard and ensure their products are of the highest quality. As Wrightbus had so much work and business deals to carry out for customers all around the globe, they had to†¦show more content†¦From this, it is visible how much Wrightbus has expanded and grew since 1946 and will continue to work their business all around the world, by doing so promotes an enterprising business that want to strive for excellence. Fred Greer always said ‘we are expanding into overseas countries and these include Las Vegas, Singapore, Netherlands, Kansas, Ireland, Brazil and now India.’ This therefore displays how Fred and other managers within the Wrightbus Company are dedicated to getting the Wrightbus products well known all around the world so that new potential customers will be interested in i nvesting in their reliable, efficient, innovative products. Wrightbus stated that their reasons for expanding into the overseas markets were to take advantage of the gap that Wrightbus believed their products could fill. The Wrightbus Company was sure that their products could easily compete with international leaders, proving that they’re enterprising and are capable of entering into new markets and are confident that they can establish themselves as major competitors which other companies should watch out for. Wrightbus have the ability to compete with other companies all around the world and have the resources and also quality products to supple to a wide variety of international markets with high standard goods that may be seen as superior and better than competitor goods by consumers in an international market and expanding business around the world.Show MoreRelatedGeographic Expansion and Profits of Financial Institutions Essay1302 Words   |  6 PagesGeographic di versification is a necessity for any financial institution interested in growing and expanding. As financial institutions grow geographically, numerous issues may arise. Before any expansion planning can be done, financial institution managers must make a determination on the type of geographic expansion that best fits the financial institution and its goals. Making the correct decision to further expand operations domestically or internationally is imperative to ensure success ofRead MoreEisners Destruction of Disney1266 Words   |  6 PagesSince its humble beginnings in 1923, the transformation and transition of The Walt Disney Company has been staggering. The ability of the organization to integrate and excel in so many business areas is admirable and should be respected on many levels. Michael Eisner’s crucial role in the turnaround of the organization since his arrival in 1984 is valued on many levels, but over that last few years, he has taken many missteps in pro perly managing the organization. Although Eisner often vocalizedRead MoreStrategy Management : Multinational Corporations And Other Industries Essay1366 Words   |  6 Pagesprevious years of data and history of the organization in designing the strategies. Strategy management team in an organization is very crucial as it designs the future of the organization as the strategic management designs plans for the effective business operations of the organization. The strategic management process is a five step model and it has a series of steps in order to design an effective strategic plan. The following are the key steps in a strategic management plan: Decide a common goalRead MoreEssay about Ansoff Matrix – Product Market Grid854 Words   |  4 Pagesproduct/ market matrix suggests that a business’ attempts to grow depend on whether it markets new or existing products in new or existing markets. The traditional four box grid or matrix Ansoff model Alternative Ansoff style matrix A revised version of the Ansoff matrix featuring a 3Ãâ€"3 or nine box grid or matrix. History – The Product / Market Matrix Igor Ansoff created the Product / Market diagram in 1957 as a method to classify options for business expansion. The simplisity of this model isRead MoreAsahi Glass Company:Strategy1634 Words   |  7 Pagesleading global glass manufacturer. In 1993, Asahi Glass is reviewing its future direction, particularly whether it should divest its electronics business. New Product Opportunities New Glass The glass industry is the cash cow for Asahi. Although earlier the industry was designated as a mature business, industry observers viewed the future of the new glass business as rosy, expecting it to reach $20 billion by the turn of the century. Flat glass could be viewed as the companys core competency as not onlyRead MoreKfcs Big Game of Chicken1081 Words   |  5 Pageseither focus solely on the foreign markets, or focus both with restructure the domestic market. Two recommendations are need to take into steps to create values for the Company’s future development: expansion the foreign market and restructure the domestic market. Creating Value Through Expansion and Restructuring Strategic Area: Accounting-Categorize the Profits into Geographic Locations. Opportunities to Create Value ï‚ · Complement and categorize the profits of new stores into different geographicRead MoreGlobal Versus Regional Geographic Diversification Essay1546 Words   |  7 PagesGlobal versus Regional Geographic Diversification Recent progresses in the international business literature note down that multinational enterprises (MNEs) have a tendency to be more regional than global, in terms of width and strength of their market covering, and that the majority of their international action is conduct within their home regions. In agreement with the regionalization theory, this suggest that the responsibility of intra-regional expansion is much lower than the responsibilityRead MoreXyz Company Going Ipo1307 Words   |  6 Pages................................................................................................3 Corporate intention of going public ................................................................................................4 Corporate diversification into commercial sector ...........................................................................5 Operational efficiency ....................................................................................................................6 EffectivenessRead MoreDiversification And Diversification For International Markets1482 Words   |  6 PagesIntroduction: Diversification and adapting to internationalisation is a way to survive in a competitive business environment and is well researched and adopted in the business world. It is possibly the most logical and secure way for companies to avoid that their share of a given market will not be taken over by other competitors when they try to diversify technologically, geographically or product wise. It also helps reduce the risk by spreading it into different markets. There are many assortedRead MoreXyz Company Going Ipo1314 Words   |  6 Pages..............................................................................................3 Corporate intention of going public ................................................................................................4 Corporate diversification into commercial sector ...........................................................................5 Operational efficiency ....................................................................................................................6

Examination System free essay sample

Decline in the standard of education 2. Fault lies with the faulty examination system 3. Only a test of memory 4. Causes worry but not induces students to work hard 5. Teachers are over burdened 6. Profitable business 7. Need to change the system The standard of education is declining in Pakistan day by day. Our educational institutions are producing not men of letters but men of money. They are not learned people with independent thinking and a wider and serious outlook on life. Their purpose of getting education is not to prepare themselves for life. They want only a job that may give them money to buy luxuries of life and power to harm others. So they seek short cuts to pass their examination so that may achieve their goal as soon as possible and with as less labour as they can. Unfortunately our examination system is so out dated and it helps them achieve this aim. We will write a custom essay sample on Examination System or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page Great progress has been made in every field of study. But the method of testing a person’s knowledge is still old. People have now started crying against the present examination system. They argue that it is only a good means of testing a student’s memory. But it can tell us nothing about his real ability. Examination cause worry because so much depends on them. They are all the mark of success or failure in our society. Your whole future may be decided in one fateful day. It dose not matter that you were not feeling well or that your mother died. If you fail in the examination, you will be considered as dull as a donkey. The aim and object of education be to train us to think for ourselves. The examination system does anything but that. We have to follow and learn only what is clearly defined by a syllabus. Thus examination encourage memorization. We mug up some important questions that may occur in the examination paper and then vomit them out in the examinations. Thus examination do not motivate a student to ready widely. Then teachers themselves are judged techniques. So they are compelled to train their students in examination techniques. It is often seen that the most successful students are those who are best trained in examination techniques and not those who are best educated. The series of misfortunes through which a student has to pass during his academic life does not end here. They are judged by some anonymous examiner. Examiners are only human. They get tried, hungry and angry while evaluating answer books. Yet they have to mark piles of hastily written scripts in a limited amount of time. Everybody knows that their word carries weight. You cannot protest against the injustice done to you by the examiner. Examinations have become a profitable business for the institutions that run them. They collect huge fees from the students each year and then spend them lavishly on the maintenance of their offices and cars. This system requires a drastic change. Syllabi should be revised. They should be in harmony with the mental level of the students and the requirements of the country. Teachers should be imparted proper training before they are assigned the noble job of teaching. In the examination a student’s insight, his receptive and reflective power and his abiltity to express himself in a lucid and clear manner should be checked. Only then can we produce another Jinnah, Iqbal or Salam.